Any interest in trades?
2013-08-02 06:31:57
6
FS: Cannondale CAAD9 CX 50cm
This thing doesn't get ridden nearly enough. It's a great for something like CtC, lightweight but room for big squishy tires. Last I weighed it, it was around 18 lbs? I forget what wheels/pedals/etc. was on that weigh-in though.
I'd say it's in "good condition", no dings or dents, some scratches as to be expected. It took me forever to find this and I really shouldn't let go of it, but someone should enjoy it more than me. Last of the USA made Cannondales.
Specs:
50cm (52.5cm TT)
74 deg STA (full geometry here)
EC90X fork
SRAM Red crank (Cannondale branded) 53/39, 170mm
3T Ergonova 40cm bars
Ultegra 6700 shifters
105 5700 derailleurs
Bontrager Race wheels
SRAM 11-28 cassette
Tektro 8cm mini-Vs front, Shimano CX50 canti rear
Koolstop CX pads F&R
Ritchey WCS wet seatpost
3T ARX Team 90mm stem
Gran Bois Cypres 700x30mm tires
Romin 130mm saddle
Planet Bike fenders
Prices:
Complete as-is: $1250
Module (frame/fork/headset/seatpost/crank): $700
If parted out:
Frameset: $475
6700 shifters: $225
Derailleurs: $80
Brakes: $20
Crankset: $200
Seatpost: $60
Bars: $40
Stem: $50
Tires: $80
Wheelset: $150
Saddle: $70
Pedals not included.
I also have a set of Specialized carbon cranks + 36/46 rings that I can put on there if you're looking to make this cyclocross ready.
Specs:
50cm (52.5cm TT)
74 deg STA (full geometry here)
EC90X fork
SRAM Red crank (Cannondale branded) 53/39, 170mm
3T Ergonova 40cm bars
Ultegra 6700 shifters
105 5700 derailleurs
Bontrager Race wheels
SRAM 11-28 cassette
Tektro 8cm mini-Vs front, Shimano CX50 canti rear
Koolstop CX pads F&R
Ritchey WCS wet seatpost
3T ARX Team 90mm stem
Gran Bois Cypres 700x30mm tires
Romin 130mm saddle
Planet Bike fenders
Prices:
Complete as-is: $1250
Module (frame/fork/headset/seatpost/crank): $700
If parted out:
Frameset: $475
6700 shifters: $225
Derailleurs: $80
Brakes: $20
Crankset: $200
Seatpost: $60
Bars: $40
Stem: $50
Tires: $80
Wheelset: $150
Saddle: $70
Pedals not included.
I also have a set of Specialized carbon cranks + 36/46 rings that I can put on there if you're looking to make this cyclocross ready. 2013-08-02 00:18:40
O.O waaaant. I'd have to see it in person to make sure it fit — might be too big since I'm a hobbit — but I'd love to have this bike. That link to the geometry table isn't functional; do you know where I could find that info?
2013-08-02 08:11:14
pearmask: It must have disappeared in one of my ninja-edits.
The standover is a little tall because it's a CX bike, but if you're clipped/strapped in, I usually just lean it over slightly when stopped (my inseam is 30", and the standover is listed as 31.2").
boostuv: I'm really only looking for a wheelset to put my road bike back together, but let me know what you might have.
The standover is a little tall because it's a CX bike, but if you're clipped/strapped in, I usually just lean it over slightly when stopped (my inseam is 30", and the standover is listed as 31.2").
boostuv: I'm really only looking for a wheelset to put my road bike back together, but let me know what you might have. 2013-08-02 08:37:58
I love those bikes... too small for me though. I'm super glad you posted that geometry chart because I didn't realize this model had different sizing than the current production CAADX. The current line has a gap between the 51cm and the 54cm, but the 52cm model of the CAAD9 would fit like a glove.
2013-08-02 11:54:36
Last bump before I ship it out to Ohio (booo!).
2013-08-05 08:01:38